Physics, 27.08.2021 09:30, eshaesmot12345
Find the effort , if load is 500N , load distance is 0.5m and effort distance is 2.5m
Answers: 2
Physics, 21.06.2019 18:20, deku6
The extremely high temperatures needed to trigger nuclear fusion are proposed to be generated by laser irradiating a spherical pellet of deuterium and tritium fuel of diameter 1.8 mm. (a) determine the maximum fuel temperature that can be achieved by irradiating the pellet with 200 lasers, each producing a power of 550 w. the pellet has an absorptivity 0.3 and emissivity 0.8.
Answers: 2
Physics, 22.06.2019 05:10, delawdermia27
Which diagram correctly demonstrates the various forces acting on a ball moving horizontally with some speed?
Answers: 2
Physics, 22.06.2019 12:00, angelamirga332
Asolid round steel rod 6.25 mm in diameter and 375 mm long is rigidly bonded to the end of solid square brass rod 25 mm on a side and 300 mm long. the geometric axes of the bare are along the same line. an axial tensile force of 5.4 kn is applied at the extreme ends of the assembly. for steel e = 200 gpa and for brass e = 90 gpa. determine the total elongation for the assembly.
Answers: 1
Physics, 22.06.2019 13:40, crayons18
An ideal otto cycle has a compression ratio of 10.5, takes in air at 90 kpa and 40°c, and is repeated 2500 times per minute. using constant specific heats at room temperature, determine the thermal efficiency of this cycle and the rate of heat input if the cycle is to produce 90 kw of power.
Answers: 2
Find the effort , if load is 500N , load distance is 0.5m and effort distance is 2.5m...
Social Studies, 26.08.2019 15:30
Social Studies, 26.08.2019 15:30
History, 26.08.2019 15:30