Physics
Physics, 27.08.2021 01:10, bigJ4864

A rigid, well-insulated tank of volume 0.9 m3 is initially evacuated. At time t 5 0, air from the surroundings at 1 bar, 278C begins to flow into the tank. An electric resistor transfers energy to the air in the tank at a constant rate for 5 minutes, after which time the pressure in the tank is 1 bar and the temperature is 4578C. Modeling air as an ideal gas, determine the power input to the tank, in kW.

answer
Answers: 2

Other questions on the subject: Physics

image
Physics, 22.06.2019 00:30, dondre54
During spring semester at mit, residents of the parallel buildings of the east campus dorms battle one another with large catapults that are made with surgical hose mounted on a window frame. a balloon filled with dyed water is placed in a pouch attached to the hose, which is then stretched through the width of the room. assume that the stretching of the hose obeys hooke's law with a spring constant of 89.0 n/m. if the hose is stretched by 5.80 m and then released, how much work does the force from the hose do on the balloon in the pouch by the time the hose reaches its relaxed length? unitst 3 number-1497 the tolerance is +/-5% open show work click if you would like to show work for this question:
Answers: 2
image
Physics, 22.06.2019 03:00, Jasten
Which of the following is not a part of the respiratory system? a. pharynx b. trachea c. pancreas d. larynx
Answers: 1
image
Physics, 22.06.2019 03:10, joho38
Athin plate moves between two parallel, horizontal, stationary flat surfaces at a constant velocity of v = 7.5 m/s. the two stationary surfaces are spaced 4 cm apart, and the medium between them is filled with oil whose viscosity is 0.9 n·s/m2. the part of the plate immersed in oil at any given time is 2 m long and 0.5 m wide. if the plate moves through the mid-plane between the surfaces, determine the force required to maintain this motion. what would your response be if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top surface (h1)? if the plate moves through the mid-plane between the surfaces, the force required to maintain the motion will be n. if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top (h1) surface, the force required to maintain the motion would be n.
Answers: 2
image
Physics, 22.06.2019 03:40, AkramMasoud
Which types of electromagnetic waves have higher frequencies than the waves that make up ultraviolet light? check all that apply. radio waves infrared light microwaves gamma rays visible light x-rays
Answers: 2
Do you know the correct answer?
A rigid, well-insulated tank of volume 0.9 m3 is initially evacuated. At time t 5 0, air from the su...

Questions in other subjects:

Konu
Mathematics, 11.01.2020 20:31