Physics
Physics, 23.08.2021 04:20, karsynraine8224

A small marble slides along the inside surface of a cup which has a cross-sectional shape given by y = 0.100x ^ 2 , where x is the displacement from the center of the cup and y is the height of the surface above the bottom. If a harmonic oscillation is started, what would be its frequency?

answer
Answers: 2

Other questions on the subject: Physics

image
Physics, 21.06.2019 22:00, markyyy53
Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)
Answers: 1
image
Physics, 22.06.2019 02:30, chycooper101
Aforce of 9.00 newtons acts at an angle of 19.0 to the horizontal. what is its component in the horizontal direction?
Answers: 2
image
Physics, 22.06.2019 10:00, issaaamiaaa15
Which is the correct symbol for an isotope of iodine with 53 protons and 78 neutrons?
Answers: 2
image
Physics, 22.06.2019 18:30, winterblanco
Jenny wants to test the electrical conductivity of two substances dissolved in water. she is preparing the containers for the experiment. which factor is most important for her to control? a) volumes of the solutions b) appearance of the solutions c) temperatures of the solutions d) concentrations of the solutions
Answers: 1
Do you know the correct answer?
A small marble slides along the inside surface of a cup which has a cross-sectional shape given by y...

Questions in other subjects:

Konu
Mathematics, 07.11.2019 09:31