Physics
Physics, 17.08.2021 19:10, saneayahsimmons

An electric resistor heater working with a voltage of 110 V and a current of 30 A is employed for heating 1.73 kg/s of air. If the initial temperature of air is 15 C. What will be the final temperature (in K)

answer
Answers: 2

Other questions on the subject: Physics

image
Physics, 21.06.2019 17:10, rebecca0022
Aspring with a mass of 2 kg has a damping constant 14 kg/s. a force of 3.6 n is required to keep the spring stretched 0.3 m beyond its natural length. the spring is stretched 0.6 m beyond its natural length and then released. find the position of the mass at any time t. (assume that movement to the right is the positive x-direction and the spring is attached to a wall at the left end.)
Answers: 3
image
Physics, 22.06.2019 06:00, pinkyglitter2696
What are atoms of the same element with varying number of neutrons
Answers: 3
image
Physics, 22.06.2019 11:20, cjd1214812148
The ultracentrifuge is an important tool for separating and analyzing proteins. because of the enormous centripetal accelerations, the centrifuge must be carefully balanced, with each sample matched by a sample of identical mass on the opposite side. any difference in the masses of opposing samples creates a net force on the shaft of the rotor, potentially leading to a catastrophic failure of the apparatus. suppose a scientist makes a slight error in sample preparation and one sample has a mass 10 mg larger than the opposing sample. if the samples are 12 cm from the axis of the rotor and the ultracentrifuge spins at 70,000 rpm, what is the magnitude of the net force on the rotor due to the unbalanced samples? ( be thorough on your answer)
Answers: 3
image
Physics, 22.06.2019 13:10, pearlvldz
The atoms in a nickel crystal vibrate as harmonic oscillators with an angular frequency of 2.3 × 1013 rad/s. the mass of a nickel atom is 9.75 × 10-26 kg. what is the difference in energy between adjacent vibrational energy levels of nickel? (h = 6.626 × 10-34 j • s, , 1 ev = 1.60 × 10-19 j)
Answers: 2
Do you know the correct answer?
An electric resistor heater working with a voltage of 110 V and a current of 30 A is employed for he...

Questions in other subjects: