Physics, 30.07.2021 01:00, hmontalvo22

A constant volume thermometer consists of a rigid bulb and a pressure gauge. To obtain accurate results, this thermometer must be calibrated at a known pressure and temperature. Once this is done, the bulb is sealed off from the atmosphere. The volume and number of moles of gas can no longer change and the temperature is calculated from the pressure measurement * 25% Part(a) A particular constant volume thermometer is calibrated by opening it to the atmosphere while the bulb is in a bath of boiling water. Enter an expression for the temperature of the thermometer in degrees Celsius, in terms of its pressure, P. in atmospheres 779)- 37.15 1CP). 27315 X Atep Remain * 25%
Part(b) When the constant volume thermometer that was calibrated as described in part(a) is used to measure a temperature, it shows a pressure of 10.95 atm. What temperature is it indicating, in degrees Celsius?

Answers: 3

Show answers

Other questions on the subject: Physics

Physics, 21.06.2019 18:10, HOTaco554

After the near spacecraft passed mathilde, on several occasions rocket propellant was expelled to adjust the spacecraft's momentum in order to follow a path that would approach the asteroid eros, the final destination for the mission. after getting close to eros, further small adjustments made the momentum just right to give a circular orbit of radius 45 km (45 × 10^3 m) around the asteroid. so much propellant had been used that the final mass of the spacecraft while in circular orbit around eros was only 545 kg. the spacecraft took 1.04 days to make one complete circular orbit around eros. calculate what the mass of eros must be.

Answers: 1

continue

Physics, 22.06.2019 00:40, camco301

Electroplating is a way to coat a complex metal object with a very thin (and hence inexpensive) layer of a precious metal, such as silver or gold. in essence the metal object is made the cathode of an electrolytic cell in which the precious metal cations are dissolved in aqueous solution. suppose a current of 480.ma is passed through an electroplating cell with an aqueous solution of agno3 in the cathode compartment for 46.0 seconds. calculate the mass of pure silver deposited on a metal object made into the cathode of the cell. round your answer to 3 significant digits. also, be sure your answer contains a unit symbol. ×10μ

Answers: 3

continue

Physics, 22.06.2019 10:30, dontcareanyonemo

Avery long solenoid of inner radius 2.75 cm creates an oscillating magnetic field of the form = for this solenoid, =0.00425 t and =319 rad/s. (a)what is the maximum value of the induced electric field at a perpendicular distance 1.45 cm from the axis of the solenoid? (b) what is the maximum value of the inducted electric field at a point 5.85 cm perpendicular from the axis of the solenoid?

Answers: 1

continue

Physics, 22.06.2019 20:20, breannaasmith1122

Consider a file currently consisting of 200 blocks. assume that the file control block (and the index block in the case of indexed allocation) is already in memory. calculate how many disk i/o operations are required for contiguous, linked, and indexed (single-level) allocation strategies, for each of the conditions listed below. in the contiguous-allocation case, assume that there is not room to grow at the beginning but there is room to grow at the end. also assume that the block information to be added is stored in memory.

Answers: 3

continue

Do you know the correct answer?

A constant volume thermometer consists of a rigid bulb and a pressure gauge. To obtain accurate resu...