Physics
Physics, 21.07.2021 09:50, CourtGard

A 0.0780 kg lemming runs off a 5.36 m high cliff at 4.84 m/s. What
is its potential energy (PE) when it
jumps?

answer
Answers: 2

Other questions on the subject: Physics

image
Physics, 21.06.2019 22:30, nnaomii
Matt is driving down 7th street. he drives 150 meters in 18 sec. assuming he doesn’t slow down or speed up, what is his speed?
Answers: 1
image
Physics, 21.06.2019 23:30, asco0317p34v1s
Classify the following soils according to the uscs classification system. provide appropriate uscs designations. a) this sample of well-graded gravel with sand was obtained from a large earthen dam in vancouver, canada. the sample has 73% fine to coarse sub-angular gravel, 25% fine to coarse sub-angular sand and 2% fines. the maximum size of the particles is 75 mm. the coefficient of curvature is 2.7, while the uniformity coefficient is 12.4. b) this dark brown and wet soil with a “strong organic odor” has 100% passing the no. 200 sieve. the liquid limit of the material is 32% when not dried and is 21% when oven-dried. the plastic index is 21% when not dried. c) this sand has 61% predominantly fine sand, 23% silty fines, and 16% fine sub-rounded gravel size. the maximum size is 20 mm. the liquid limit is 33% and the plastic limit is 27%. d) this soil has 74% fine to coarse sub-angular reddish sand and 26% organic and silty dark brown fines. the liquid limit is 37% when not dried and is 26% when oven dried. the plastic index is 6% when not dried.
Answers: 1
image
Physics, 22.06.2019 04:50, bella2331
Asher cycles 12 miles in 16 hours. what is his speed?
Answers: 1
image
Physics, 22.06.2019 05:10, zionnahl
Total solidification times of three casting geometries are to be compared: a sphere, a cylinder, in which the length-to-diameter ration - 1.0, and a cube. volume = 1000 cm^3 for all three shhapes, and the same casting alloy is used. a) determine the solidification times of each geometry b) based on the results of part (a), which geometric element would make the best riser? c) if the mold constant = 3.5 min/cm^2 in chvorinov's rule, compute the total solidification time for each casting.
Answers: 3
Do you know the correct answer?
A 0.0780 kg lemming runs off a 5.36 m high cliff at 4.84 m/s. What
is its potential energy (P...

Questions in other subjects:

Konu
Mathematics, 17.11.2020 03:40
Konu
Mathematics, 17.11.2020 03:40