Calculate the power of a train that uses 2MJ of chemical energy in 4
seconds.

For problems 1-3, consider a simple dc brush motor with a permanent magnet stator. with an an consider a simple dc brush motor with a permanent magnet ae supply voltage of 100 v, the no-load speed of the motor is 1000 rpm. this motor can provide a torque of 1.9 n-m at 800 rpm drawing a current of 2 a current are both zero at no load.) 1. with an armature supply voltage of 100 v, the motor is operated at 900 rpm. what is the motor torque? what is the mechanical power delivered by the motor? what is the current draw? what is the electrical power input? what is the energy efficiency of the motor? with an armature supply voltage of 100 v, the motor is operated at 1100 rpm (where it acts as a generator). what torque input is required? what mechanical power is required what current is generated? what is the electrical power generated? what is the energy efficiency of the motor acting as a generator? 2. with an armature supply voltage raised to 120 v, the motor is operated at 1000 rpm. what is the no-load speed? what is the motor torque? what is the mechanical power delivered by the motor? what is the current draw? what is the electrical power input what is the energy efficiency of the motor? 3.

Asmall electric heater, immersed in 80g of water in a calorimeter of 40j/k raises the temperature from 10.5 degree celsius to 25 degree celsius in 12 minutes. using the same apparatus with 50g of oil instead of water, it is found that the temperature of oil rises from 7 degree celsius to 27 degree celsius in 10 minutes. find specific heat capacity of the oil.

Elements in group viiia (also known as group 18, or the noble gases) have similar properties because they all have a. the same number of electron shells b. full octets c. the same number of valence electrons d. the same number of electrons needed to fill their octet