Physics, 23.06.2021 20:30, brebun4742
The reaction shown below is used in the production of steel. It is an exothermic reaction. An engineer thinks that by finding the correct catalyst, he can reduce the amount of energy released by the reaction. Will his plan have the desired effect? Why or why not?
Fe3O4(s) + 4C(s) โ 3Fe(s) + 4CO(g)
Yes, because the reaction is already exothermic, so any added reactants will lower the amount of energy released.
Yes, because the catalyst should add energy, thereby reducing the energy released.
No, because catalysts always increase the amount of energy released by reactions.
No, because catalysts do not affect how much energy is released, only the rate of reaction.
Answers: 2
Physics, 21.06.2019 21:50, glocurlsprinces
Acar travels along a highway with a velocity of 24 m/s, west. the car exits the highway; and 4.0 s later, its instantaneous velocity is 16 m/s, 45ยฐ north of west. what is the magnitude of the average acceleration of the car during the four-second interval?
Answers: 2
Physics, 22.06.2019 10:50, afonseca73
Asheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200oc and is permitted to achieve a steady-state diffusion condition. the diffusion coefficient for nitrogen in steel at this temperature is 6 x 10- 11 m2 /s, and the diffusion flux is found to be 1.2 x 10-7 kg/m2 -s. also, it is known that the concentration of nitrogen in the steel at the high-pressure surface is 4 kg/m3 . how far into the sheet from this high-pressure side will the concentration be 2.0 kg/m3 ? assume a linear concentration profile.
Answers: 3
Physics, 22.06.2019 21:00, andybiersack154
The velocity of a car traveling in a straight line increases from 0 meters/second to 30meters/second in 8 seconds. what is the average acceleration of the car?
Answers: 1
Physics, 23.06.2019 09:30, pineapplefun
Mrs. smith does her daily chores. she walks 5 m to the laundry room and then turns around and walks -14 m to the kitchen. the whole process takes her 11 minutes. what was her average velocity for these events? (choose more than 1) a. 1.48 m/s b. 0.212 m/s c. -0.136 m/s d. -0.0075 m/s
Answers: 3
The reaction shown below is used in the production of steel. It is an exothermic reaction. An engine...
Physics, 24.11.2019 12:31
Biology, 24.11.2019 12:31
Physics, 24.11.2019 12:31
Geography, 24.11.2019 12:31
Geography, 24.11.2019 12:31