Physics, 21.06.2021 14:00, hellp138

Assume we have a 1D print pattern with a resolution (i. e., spatial sampling frequency) of 120 dots per cm, which equals approximately 300 dots per inch (dpi) and a total signal length of N= 2800 samples. Calculate the
i. Sampling interval [2]
ii. Physical signal length [1]
iii. The fundamental frequency of this signal (again implicitly assumed to be periodic) [1]
iv. Maximum frequency that can be represented by this signal without aliasing [2]
v. A 1D optical scanner for sampling film transparencies is supposed to resolve image structures
with a precision of 3,000dpi. What spatial distance (in mm) between samples is required such
that no aliasing occurs?

Answers: 1

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 04:00, jaejaeJae9534

Acompound machine is also called a machine. a. force b. simple c. complex d. directional

Answers: 1

continue

Physics, 22.06.2019 18:00, championroof

Acid precipitation chemically weathering a 5.0-kg limestone rock . which coukd be the result ?

Answers: 1

continue

Physics, 22.06.2019 20:50, dondre54

Asquare 1m x 1m plate is shown below. all four of its edges are kept at 0 co. at t=0the temperature distribution is given by: y xtsins n75)=.a) using separation of variables determine the temperature distribution t(x, y,t)along the plate at any time t. b) discretize the heat conduction equation +=22222 txtusing a second-order centered difference scheme for the two second derivatives and a first-order forward euler scheme for the first derivative. using von neumann stability analysis, determine the stability criterion for the proposed discretization scheme in terms of , hand t. solve for the maximum allowable time step tmax

Answers: 1

continue

Physics, 22.06.2019 23:00, rossy84

Hunter’s velocity was 4.5 m/s. at the end of his race, his velocity was the same. which best describes his movement? his movement stopped. his acceleration is zero. his time was constant. his acceleration was positive.

Answers: 1

continue

Do you know the correct answer?

Assume we have a 1D print pattern with a resolution (i. e., spatial sampling frequency) of 120 dots...