Calculate the voltage produced when 5, 1.5V batteries are combined in series? These are used to power a 10ohms light bulb. Draw a circuit diagram with a switch. What is the current flowing through the
closed circuit

Acylindrical specimen of a nickel alloy having an elastic modulus of 207 gpa (30 × 106psi) and an original diameter of 10.2 mm (0.40 in.) experiences only elastic deformation when a tensile load of 8900 n (2000 lbf) is applied. compute the maximum length of the specimen before deformation if the maximum allowable elongation is 0.25 mm (0.010 in.)

Matt is driving down 7th street. he drives 150 meters in 18 sec. assuming he doesn’t slow down or speed up, what is his speed?

Follow these directions and answer the questions. 1. set up the ripple tank as in previous investigations. 2. bend the rubber tube to form a "concave mirror" and place in the ripple tank. the water level must be below the top of the hose. 3. generate a few straight pulses with the dowel and observe the reflected waves. do the waves focus (come together) upon reflection? can you locate the place where the waves meet? 4. touch the water surface where the waves converged. what happens to the reflected wave? 5. move your finger twice that distance from the hose (2f = c of c, center of the curvature) and touch the water again. does the image (the reflected wave) appear in the same location (c of c)? you may have to experiment before you find the exact location. sometimes it is hard to visualize with the ripple tank because the waves move so quickly. likewise, it is impossible to "see" light waves because they have such small wavelengths and move at the speed of light. however, both are examples of transverse waves and behave in the same way when a parallel wave fronts hit a curved surface.