Power lines carry energy in the form of electricity.

Electrical

Explanation:

"Power lines or transmission lines, such as those in Figure 1, move electricity from point A to point B. Usually, this electricity is alternating current so step-up transformers can increase the voltage. This increased voltage allows efficient transmission for 500 kilometers or less. There are 3 types of lines:[3]

Overhead lines are very high voltage, between 100 kV and 800 kV, and do the majority of long distance transmission. They must be high voltage in order to minimize power losses to resistance.

Underground lines are used to transport power through populated areas, underwater, or pretty much anywhere that overhead lines can't be used. They are less common than overhead lines due to heat-related losses and higher cost.

Subtransmission lines carry lower voltages (26 kV - 69 kV) to distribution stations, and can be overhead or underground." - University of  Calgary ENERGY EDUCATION: ELECTRICAL TRANSMISSION.

the independent variable, the one that is intentionally manipulated, is whether or not the car hits the barrier.

the dependent variable, the one that you measure the response in, is the distance that the washers travel.

a solenoid is created by wrapping a l = 90 m long wire around a hollow tube of diameter d = 4.5 cm.   the wire diameter is d = 0.9 mm.   the solenoid wire is then connected to a power supply so that a current of i = 9 a flows through the wire.

randomized variablesl = 90 m

d = 4.5 cm

d = 0.9 mm

i = 9 a                                          

write an expression for the number of turns, n, in the solenoid. you do not need to take into account the diameter of the wire in this calculation.

calculate the number of turns, n, in the solenoid.

write an expression for the length of the solenoid (l2) in terms of the diameter of the hollow tube d.

calculate the length of the solenoid (l2)   in meters.

calculate the magnitude of the magnetic field at the center of the solenoid in teslas.

explanation: