A parallel plate vacuum capacitor has 8.40 J of energy stored. The separation between plates is 2.30 mm. If the separation is decreased to 1.15 mm what is the energy stored if (a) the charge Q on the plates is held constant, and (b) the voltage V across the plates is held constant

(a) 4.20 J

(b) 16.74 J

For a parallel plate vacuum capacitor with area A and whose plates are separated by by a distance of d, its capacitance C is given by;

C = A∈₀ / d              --------------------(i)

Where;

∈₀ = constant called permittivity of vacuum.

The energy U stored in such capacitor is given by;

U = CV²             ----------------------(ii)

or

U =  (Q²/C)        -------------------(**)

Where;

V = potential difference or voltage across the plates.

Q = charge on the plates.

(a) If the charge is held constant

Combine equations (i) and (**) to give;

U =  Q² / (A∈₀ / d)     -----------------------(iii)

From the question;

The parallel plate capacitor has 8.40J energy stored and distance between plates is 2.30mm i.e

U = 8.40J

d = 2.30mm = 0.023m

Substitute these values into equation (iii)

8.40 =  Q² / (A∈₀ / 0.023)

8.40 =  Q² x (0.023 / A∈₀)

Multiply through by 2

2 x 8.40 = Q² x (0.023 / A∈₀)

16.80 = Q² x (0.023 / A∈₀)

Divide through by 0.023

16.80 / 0.023 = Q² x (0.023 / A∈₀) / 0.023

730.4 = Q² / (A∈₀)

Make Q² subject of the formula

Q² = 730.4(A∈₀)

Now, if the separation distance is decreased to 1.15mm and the voltage is held constant i.e

d = 1.15mm = 0.0115m

Q = constant [this means that Q² still remains 730.4(A∈₀) ]

The energy stored is found by substituting these values of d and Q² into equation (iii) as follows;

U =   Q² / (A∈₀ / d)

U = (730.4(A∈₀)) / (A∈₀ / 0.0115)

U = (730.4(A∈₀))(0.0115 / A∈₀)

U = (730.4)(0.0115)

U = 4.20J

Therefore, the energy stored if the charge Q on the plates is held constant is 4.20 J

(b) If the voltage is held constant

Combine equations (i) and (ii) to give;

U =  (A∈₀ / d)V²     -----------------------(iv)

From the question;

The parallel plate capacitor has 8.40J energy stored and distance between plates is 2.30mm i.e

U = 8.40J

d = 2.30mm = 0.023m

Substitute these values into equation (iv)

8.40 =  (A∈₀ / 0.023)V²

Multiply through by 2 x 0.023

2 x 0.023 x 8.40 = (A∈₀)V²

2 x 0.023 x 8.40 = (A∈₀)V²

0.385 = (A∈₀)V²

Make V² subject of the formula

V² = 0.385/(A∈₀)

Now, if the separation distance is decreased to 1.15mm and the voltage is held constant i.e

d = 1.15mm = 0.0115m

V = constant [this means that V² still remains 0.385/(A∈₀) ]

The energy stored is found by substituting these values of d and V² into equation (iv) as follows;

U =  (A∈₀ / 0.0115)[0.385/(A∈₀)]  

U = (0.385/0.0115)

U = 16.74

Therefore, the energy stored if the voltage V across the plates is held constant is 16.74 J

a and b sometimes have a positive value

see the picture for the vector

the magnitude of the vector by pythagorean theorem

r = √( (-10)^2 + (3)^2 ) = √109

magnitude = √109 units

the direction angle between vector and x-axis is

tan^(-1)(3/10) = 16.699

so the direction is approximately 16.7 degrees north of west