A 4.0-m-long, 2.5-mm-diameter aluminum wire has a potential difference of 3.5 V between its ends. Consider an electron halfway between the center of the wire and the surface that is moving parallel to the wire at the drift speed. What is the ratio of the electric force on the electron to the magnetic force on the electron

As part of an industrial process, air as an ideal gas at 10 bar, 400k expands at steady state through a valve to a pressure of 4 bar. the mass flow rate of air is 0.5 kg/s. the air then passes through a heat exchanger where it is cooled to a temperature of 295k with negligible change in pressure. the valve can be modeled as a throttling process, and kinetic and potential energy effects can be neglected. (a) for a control volume enclosing the valve and heat exchanger and enough of the local surroundings that the heat transfer occurs at the ambient temperature of 295 k, determine the rate of entropy production, in kw/k. (b) if the expansion valve were replaced by an adiabatic turbine operating isentropically, what would be the entropy production? compare the results of parts (a) and (b) and discuss.

Apulley system is used to lift a 2,000 newton engine up a distance of 3 meters. the operator must apply a force of 250 newtons to the chain of the pulley system to lift the motor. to lift the engine 3 meters, the operator must pull a total of 30 meters of chain through the pulley system. what is the value of di?

Which best describes what forms in nuclear fission? a. two smaller, more stable nucleib. two larger, less stable nucleic. one smaller, less stable nucleusd. one larger, more stable nucleus