Physics
Physics, 23.05.2021 14:00, xxchloekai

A person pulls a box across the floor with a rope. The rope makes an angle of 40 degrees tot he horizontal, and a total of 125 newtons of force is applied. How much work is done if the box is pulled for 25 meters?

answer
Answers: 1

Other questions on the subject: Physics

image
Physics, 22.06.2019 03:00, bwheele6791
Arotating space station is said to create “artificial gravity”—a loosely-defined term used for an acceleration that would be crudely similar to gravity. the outer wall of the rotating space station would become a floor for the astronauts, and centripetal acceleration supplied by the floor would allow astronauts to exercise and maintain muscle and bone strength more naturally than in non-rotating space environments. if the space station is 200 m in diameter, what angular velocity would produce an “artificial gravity” of 9.80 m/s^{2} 2 at the rim?
Answers: 3
image
Physics, 22.06.2019 11:20, cjd1214812148
The ultracentrifuge is an important tool for separating and analyzing proteins. because of the enormous centripetal accelerations, the centrifuge must be carefully balanced, with each sample matched by a sample of identical mass on the opposite side. any difference in the masses of opposing samples creates a net force on the shaft of the rotor, potentially leading to a catastrophic failure of the apparatus. suppose a scientist makes a slight error in sample preparation and one sample has a mass 10 mg larger than the opposing sample. if the samples are 12 cm from the axis of the rotor and the ultracentrifuge spins at 70,000 rpm, what is the magnitude of the net force on the rotor due to the unbalanced samples? ( be thorough on your answer)
Answers: 3
image
Physics, 22.06.2019 18:30, violetvinny
Which form of cell division creates the sperm and egg, resulting in half of the chromosomes as the other cells?
Answers: 1
image
Physics, 23.06.2019 06:30, IkarosSakurai
Asquare isothermal chip is of width w=5 mm on a side and is mounted in a substrate such that its side and back surfaces are well insulated; the front surface is exposed to the flow of a coolant at tinf=15 °c. from reliability considerations, the chip temperature must not exceed t=85 °c. if the coolant is air and the corresponding convection coefficient is h=200 w/m2 x k, what is the maximum allowable "power" of the chip? if the coolant is a liquid for which h=3000 w/m2 x k, what is the maximum allowable power of the chip?
Answers: 2
Do you know the correct answer?
A person pulls a box across the floor with a rope. The rope makes an angle of 40 degrees tot he hori...

Questions in other subjects:

Konu
Mathematics, 15.10.2020 09:01
Konu
Social Studies, 15.10.2020 09:01