Physics, 16.05.2021 09:20, JustinLaucirica

State one similarity between rotatory and circular motion

Answers: 3

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 01:00, HLEPPLS

With i really need the correct answer!

Answers: 2

continue

Physics, 22.06.2019 19:30, FireFlight

Point charges q1=+2.00μc and q2=−2.00μc are placed at adjacent corners of a square for which the length of each side is 1.50 cm . point a is at the center of the square, and point b is at the empty corner closest to q2. take the electric potential to be zero at a distance far from both charges. part a what is the electric potential at point a due to q1 and q2? express your answer with the appropriate units.

Answers: 2

continue

Physics, 23.06.2019 03:10, stotherow5

You have been hired to design a spring-launched roller coaster thatwill carry two passengers per car. the car goes up a 10-m highhill, then descends 15m to the track's lowest point. you'vedetermined that the spring can be compressed a maximum o 2.0m andthat a loaded car will have a maximum mass of 400kg. for safetyreasons, the spring constant should be 10% larger than the minimumneeded for the car to just make it over the top. a) what spring constant (k) should you specify ? b) what is the maximum speed of a 350 kg car if the spring iscompressed the full amount.

Answers: 2

continue

Physics, 23.06.2019 06:30, IkarosSakurai

Asquare isothermal chip is of width w=5 mm on a side and is mounted in a substrate such that its side and back surfaces are well insulated; the front surface is exposed to the flow of a coolant at tinf=15 °c. from reliability considerations, the chip temperature must not exceed t=85 °c. if the coolant is air and the corresponding convection coefficient is h=200 w/m2 x k, what is the maximum allowable "power" of the chip? if the coolant is a liquid for which h=3000 w/m2 x k, what is the maximum allowable power of the chip?

Answers: 2

continue

Do you know the correct answer?

State one similarity between rotatory and circular motion...