Physics
Physics, 30.04.2021 22:10, kcarstensen59070

There are 3 questions on this one and they are not related. The brick wall (of thermal conductivity
0.82 W/m ·
◦ C) of a building has dimensions
of 2.9 m by 8 m and is 12 cm thick.
How much heat flows through the wall in
a 7.6 h period when the average inside and
outside temperatures are, respectively, 26◦C
and 3◦C?
Answer in units of MJ.

Three liquids are at temperatures of 5 ◦C,
21◦C, and 39◦C, respectively. Equal masses of
the first two liquids are mixed, and the equilibrium temperature is 16◦C. Equal masses of
the second and third are then mixed, and the
equilibrium temperature is 27.8
◦C.
Find the equilibrium temperature when
equal masses of the first and third are mixed.
Answer in units of ◦C.

A jar of tea is placed in sunlight until it
reaches an equilibrium temperature of 33.9
◦C .
In an attempt to cool the liquid, which has a
mass of 196 g , 123 g of ice at 0.0
◦C is added.
At the time at which the temperature of the
tea is 29.5
◦C , find the mass of the remaining
ice in the jar. The specific heat of water
is 4186 J/kg ·
◦ C . Assume the specific heat
capacity of the tea to be that of pure liquid
water.
Answer in units of g.

answer
Answers: 2

Other questions on the subject: Physics

image
Physics, 21.06.2019 23:00, 12camtheman
How is acceleration calculated? a. initial velocity - final velocity / timeb. initial velocity + final velocity / timec. final velocity - initial velocity / timed. final velocity / timele select the best answer from the choices provided0oood00save and exitnextmark this and return
Answers: 1
image
Physics, 22.06.2019 06:30, bradleydb222
5submission this assignment is worth 20 points total. you are required to submit the following by next lab: 1. (3 points) determine the equation for the output angular velocity ω2 = θ˙ 2 as a function of θ1, ω1 = θ˙ 1 and α. you must show all your work to receive credit. 2. (2 points) use the result of problem#1 to plot ω2 over 0 ≤ θ1 ≤ 360deg with ω1 = 360deg/sec. do this for α = {10,30}deg. show the results on the same plot and properly label the axes, title, legend. for this you can use matlab or ms excel. 3. (3 points) determine the equation for the output angular acceleration ω˙ 2 and create a plot similar to the one in problem#2. 4. (10 points) submit plots of the results (ω2 and ω˙ 2) obtained from creo/mechanism and compare them to results of problem#2 and problem#3. note that you should do these comparisons for the two cases with α = {10,30}deg. 5. (2 points) provide a brief explanation of the results. did they match? what are the implications as misalignment angle increases?
Answers: 3
image
Physics, 22.06.2019 07:30, amakayla57
Automobile fuel efficiency is often measured in miles that the car can be driven per gallon of fuel (mpg). heavier cars tend to have lower fuel efficiencies (lower mpg ratings). which variable (weight or fuel efficiency) is most naturally considered the explanatory (predictor) variable in this context?
Answers: 3
image
Physics, 22.06.2019 10:30, tay8556
The uniform slender bar rests on a smooth horizon- tal surface when a force f is applied normal to the bar at point a. point a is observed to have an initial acceleration aa of 20 m/s2, and the bar has a corre- sponding angular acceleration of 18 rad /s2. deter- mine the distance b.
Answers: 1
Do you know the correct answer?
There are 3 questions on this one and they are not related. The brick wall (of thermal conductivit...

Questions in other subjects:

Konu
History, 12.05.2021 14:00
Konu
Mathematics, 12.05.2021 14:00
Konu
Spanish, 12.05.2021 14:00