Answers: 3
Physics, 23.06.2019 18:00, liltonio
Apalm springs golf course has requested a permit to install a 40000 f t2 pond to enhance the beauty of its facilities. since the evaporation rates are very high in palm springs, it is likely they will need to pump a lot of groundwater to keep the pond full. the city has hired you (a water resources engineer) to determine how much water needs to be pumped per year in order to keep the pond filled. there is a small creek that discharges an average of 0.25 m3/s into the pond. the outlet valve from the pond releases an average rate of 0.30 m3/s (to keep the pond from getting stagnant). precipitation on the pond is 260 mm/year, and the annual evaporation is estimated to be 105 inches/year. the pond will be lined with concrete to prevent any drainage or seepage from the bottom. using a water balance, what volume (on average) of groundwater (in cubic meters) must be added to the lake each year to keep the pond at a constant level? draw a schematic of the problem to identify the control volume and the relevant fluxes. clearly write out/define your water balance equation and variables. be careful with the units, you might want to work in m3/year or m/year.
Answers: 3
Physics, 23.06.2019 21:00, kids2006
Arod made of cobalt with a mass of 0.80 kg is heated to 800°c, then dropped into 6.00 kg of water at 10°c. what is the total change in entropy (in j/k) of the rod-water system, assuming no energy is lost by heat from this system to the surroundings
Answers: 3
NO NON USEFUL ANSWERS OR LINKS
What is the trade off between the input and output forces when some...
Mathematics, 25.11.2020 01:00
Mathematics, 25.11.2020 01:00
Mathematics, 25.11.2020 01:00
Mathematics, 25.11.2020 01:00
History, 25.11.2020 01:00
Chemistry, 25.11.2020 01:00