Physics, 26.04.2021 21:00, Kjkaiman9034

Ultimate Load (P) 35,000 pounds Original Diameter 0.450 inch Original Gage Length (Lo) 2.00 inch Diameter After Test 0.350 inch Final Gage Length (Lf) 2.30 inch Area of a circle = π r2 (π = 3.14) = Ao Radius = ½ Diameter (Ultimate Tensile Stress) UTS = P/Ao %E = ((Lf – Lo) / Lo) * 100% Given the listed values, list below A. The Ultimate Tensile Strength and B. The % Elongtation

Answers: 2

Show answers

Other questions on the subject: Physics

Physics, 21.06.2019 16:10, brendaesme

Avoltage source vs = 10 v is in series with a resistor of 10 kohm. if the source transformation theorem is applied, what will the value of the current source be in ma ?

Answers: 1

continue

Physics, 22.06.2019 02:00, ummsumaiyah4185

Write the correct abbreviation for each metric unit

Answers: 1

continue

Physics, 22.06.2019 05:40, izzyisawesome5232

An ideal polarizer with its transmission axis rotated 30 degrees to the vertical is placed in a beam of unpolarized light of intensity 10w/m^2. after passing through the polarizer, what is the intensity of the beam? a. 8.7 w/m^2 b. 7.5 w/m^2 c. 5.0 w/m^2 d. 10 w/m^2 e. 2.5 w/m^2

Answers: 1

continue

Physics, 22.06.2019 20:30, adrianayepez8

Four identical lab carts each have a mass of 200 kg. different masses are added to the carts and the velocities are measured. all carts move to the right.

Answers: 3

continue

Do you know the correct answer?

Ultimate Load (P) 35,000 pounds Original Diameter 0.450 inch Original Gage Length (Lo) 2.00 inch Dia...