A 10v battery is connected in series with 2 resistors. R1 is 1 ohm and R2 is 4 ohms. What is the current that goes across R1?

Follow these directions and answer the questions. 1. set up the ripple tank as in previous investigations. 2. bend the rubber tube to form a "concave mirror" and place in the ripple tank. the water level must be below the top of the hose. 3. generate a few straight pulses with the dowel and observe the reflected waves. do the waves focus (come together) upon reflection? can you locate the place where the waves meet? 4. touch the water surface where the waves converged. what happens to the reflected wave? 5. move your finger twice that distance from the hose (2f = c of c, center of the curvature) and touch the water again. does the image (the reflected wave) appear in the same location (c of c)? you may have to experiment before you find the exact location. sometimes it is hard to visualize with the ripple tank because the waves move so quickly. likewise, it is impossible to "see" light waves because they have such small wavelengths and move at the speed of light. however, both are examples of transverse waves and behave in the same way when a parallel wave fronts hit a curved surface.

This chart shows characteristics of three different types of waves. which statement is best supported by the information in the chart? wave x and wave y are mechanical waves, and wave z is an electromagnetic wave. wave x and wave y are electromagnetic waves, and wave z is a mechanical wave. wave x and wave z are electromagnetic waves, and wave y is a mechanical wave. wave x and wave z are mechanical waves, and wave y is an electromagnetic wave.

Aball of mass 0.3kg is released from rest at a height of 8m. how fast is it going when it hits the ground? accleration due to gravity is g=9.8m/s