a 10 kg solid disk of radius 0.5 m is rotated about an axis through its center. the disk accelerates from rest to angular speed of 3.0 rad/s while rotating 2.0 revolutions. what net torque is required? b. if the net torque is applied at an 80 degree angle, what net force was used?​

Rosa records the distance that a toy car rolls and the time it takes to cover the distance. what scientific practice is this? collecting data asking a question providing explanations communicating results

When an object moves in uniform circular motion, the direction of its acceleration is a) in the same direction as its velocity vector. b) in the opposite direction of its velocity vector c) is directed toward the center of its circular path. d) is directed away from the center of its circular path. e) depends on the speed of the object.

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)