A plate falls vertically to the floor and breaks up into three pieces, which slide along the floor. Immediately after impact, a piece of mass 332 g moves along the x-axis with a speed of 1.45 m/s, and a piece of mass 325 g moves along the y-axis with a speed of 1.13 m/s The third piece has a mass of 136 g. What angle, in radians, does the third piece's initial velocity make with the positive x-axis

Antireflective coatings on solar cells are often made by applying a thin film of silicon nitride (sinx), which has an index of refractive of 1.2, on the top of the silicon solar cell, which has a refractive index of about 3.5. however, the sun emits radiation of various wavelengths which the solar cell absorbs, and the antireflective coating can only absolutely minimize the reflection of one of these wavelengths. the coating thickness is chosen to reduce the reflection of green/yellow light (e = 2.2 ev), which is the most intense color in the solar spectrum (shown below). which of the following coatings would minimize reflection of green/yellow light? the answer is 820 nm how? what is the angular width of the central maximum of an electron traveling at 2 x 108 m/s going through a single slit of width 1 mm.

Frank just graduated from eighth grade. assuming exactly four years from now he will graduate from high school how many seconds does he have until his high school graduation

Avertical clean glass piezometer tube has an inside diameter of d = 1 mm and is used to measure pressure in a horizontal pipe carrying water as shown. due to pressure in the pipe, the water at 20c rises into the tube to a height h. if the water pressure in the pipe is p = 500 pa gauge, estimate the height h: (a) without considering surface tension (b) with surface tension (capillary) effects. the contact angle  can be assumed at 30 deg