Physics, 21.04.2021 14:00, iliketurtures

Please help with this

Answers: 1

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 05:10, zionnahl

Total solidification times of three casting geometries are to be compared: a sphere, a cylinder, in which the length-to-diameter ration - 1.0, and a cube. volume = 1000 cm^3 for all three shhapes, and the same casting alloy is used. a) determine the solidification times of each geometry b) based on the results of part (a), which geometric element would make the best riser? c) if the mold constant = 3.5 min/cm^2 in chvorinov's rule, compute the total solidification time for each casting.

Answers: 3

continue

Physics, 22.06.2019 08:00, warreliz

Hydrogen and helium are both members of?

Answers: 2

continue

Physics, 22.06.2019 16:00, lazavionadams81

At what time will the interfering waves have an amplitudeof zero?

Answers: 1

continue

Physics, 22.06.2019 16:50, lizzepacheco

Acommercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated space at -35°c by rejecting waste heat to cooling water that enters the condenser at 18°c at a rate of 0.25 kg/s and leaves at 26°c. the refrigerant enters the condenser at 1.2 mpa and 50°c. if the compressor consumes 3.3 kw of power, determine (a) the mass flow rate of the refrigerant, (b) the refrigeration load, (c) the cop, and (d) the minimum power input to the compressor for the same refrigeration load.

Answers: 2

continue

Do you know the correct answer?

Please help with this
...