Physics
Physics, 15.01.2020 07:31, mxrvin7383

If energy cannot be created or destroyed, why doesn't the ball bounce back up to the same height it was dropped at?


If energy cannot be created or destroyed, why doesn't the ball bounce back up to the same height it

answer
Answers: 2

Other questions on the subject: Physics

image
Physics, 22.06.2019 06:00, jagmeetcheema
The frequency of vibrations of a vibrating violin string is given by f = 1 2l t ρ where l is the length of the string, t is its tension, and ρ is its linear density.† (a) find the rate of change of the frequency with respect to the following. (i) the length (when t and ρ are constant) (ii) the tension (when l and ρ are constant) (iii) the linear density (when l and t are constant) (b) the pitch of a note (how high or low the note sounds) is determined by the frequency f. (the higher the frequency, the higher the pitch.) use the signs of the derivatives in part (a) to determine what happens to the pitch of a note for the following. (i) when the effective length of a string is decreased by placing a finger on the string so a shorter portion of the string vibrates df dl 0 and l is ⇒ f is ⇒ (ii) when the tension is increased by turning a tuning peg df dt 0 and t is ⇒ f is ⇒ (iii) when the linear density is increased by switching to another string df dρ 0 and ρ is ⇒ f is ⇒
Answers: 3
image
Physics, 22.06.2019 14:20, jadahilbun01
A1-lb collar is attached to a spring and slides without friction along a circular rod in a vertical plane. the spring has an undeformed length of 5 in. and a constant k =25 lb/ft. knowing that the collar is released from being held at a determine, the speed of the collar and the normal force between the collar and the rod as the collar passes through b.
Answers: 3
image
Physics, 22.06.2019 19:20, anaiyamills
Two kilograms of air within a piston–cylinder assembly executes a carnot power cycle with maximum and minimum temperatures of 800 k and 300 k, respectively. the heat transfer to the air during the isothermal expansion is 60 kj. at the end of the isothermal expansion the volume is 0.4 m3. assume the ideal gas model for the air. determine the thermal efficiency, the volume at the beginning of the isothermal expansion, in m3, and the work during the adiabatic expansion, in kj.
Answers: 1
image
Physics, 22.06.2019 19:30, VonneB1684
Which describes increasing the efficiency of energy resource
Answers: 1
Do you know the correct answer?
If energy cannot be created or destroyed, why doesn't the ball bounce back up to the same height it...

Questions in other subjects:

Konu
Biology, 03.12.2021 23:20