Physics, 19.04.2021 19:30, rodriguezjalissa132
Four masses are located in the xy plane. A 4.00 kg mass is located at the origin, and a second 4.00 kg mass is located at the point (2.00 m, 2.00 m). Two 3.00 kg masses are located at (0, 2.00 m) and (2.00 m, 0). (The masses are at the corners of a square with sides 2.00 m.) (a) Calculate the moment of inertia of this arrangement for rotations about an axis perpendicular to the xy plane and passing through the origin. (b) Calculate the moment of inertia of this arrangement for rotations about an axis perpendicular to the xy plane and passing through the center of the square. (c) Calculate the moment of inertia of this arrangement for rotations about the x axis. (d) Calculate the moment of inertia of this arrangement for rotations about the y axis.
Answers: 3
Physics, 21.06.2019 22:00, sophiamoser
In a wind tunnel the speed changes as the cross sectional area of the tunnel changes. if the speed in a 6' x 6' square test section is 100 mph, what was the speed upstream of the test section where the tunnel measured 20' x 20'? use conservation of mass and assume incompressible flow. conservation of mass requires that as the flow moves through a path or a duct the product of the density, velocity and cross sectional area must remain constant; i. e., that ova-constant. a model is being tested in a wind tunnel at a speed of 100 mph if the flow in the test section is at sea level standard conditions, what is the pressure at the model's stagnation point? (a) the tunnel speed is being measured by a pitot-static tube connected to a u- tube manometer. what is the reading on that manometer in inches of water? (b) at one point on the model a pressure of 2058 psf is measured. what is the local airspeed at that point?
Answers: 2
Physics, 22.06.2019 05:00, eshaesmot12345
Which car has the most kinetic energy? a. a car of mass 1000 kg with a speed of 3 m/s b. a car of mass 2000 kg with speed 7 m/s c. a car of mass 1000 kg with speed 7 m/s d. a car of mass 2000 kg with speed 3 m/s
Answers: 1
Physics, 22.06.2019 12:30, lmolder1329
Consider a 1000 w iron whose base plate is made of 0.5 cm thick aluminum alloy 2024-t6 (ρ = 2770 kg/m3 and cp = 875 j/kg°c). the base plate has a surface area of 0.03 m2. initially, the iron is in thermal equilibrium with the ambient air at 22°c. assuming 90% of the heat generated in the resistance wires is transferred to the plate, determine the minimum time needed for the plate temperature to reach 200°c.
Answers: 1
Four masses are located in the xy plane. A 4.00 kg mass is located at the origin, and a second 4.00...
History, 12.07.2019 00:20
Mathematics, 12.07.2019 00:20