You take a large box to the UPS store for shipping. Instead of placing the box on the spring scale to weigh, you accidentally drop the box on the scale. (Do Not Post. Posting outside of class is an academic integrity and copyright violation.) You drop the box from a height of 31 cm (0.31 m) above the scale. The spring in the scale has a spring constant of 4400 N/m. (Do Not Post. Posting outside of class is an academic integrity and copyright violation.) If the spring is compressed a maximum distance of 18 cm (0.18 m) when the box is dropped on it, what is the mass of the box

Search coils and credit cards. one practical way to measure magnetic field strength uses a small, closely wound coil called a search coil. the coil is initially held with its plane perpendicular to a magnetic field. the coil is then either quickly rotated a quarter-turn about a diameter or quickly pulled out of the field. (a) derive the equation relating the total charge q that flows through a search coil to the magnetic-field magnitude b. the search coil has n turns, each with area a, and the flux through the coil is decreased from its initial maximum value to zero in a time ∆t. the resistance of the coil is r, and the total charge is q = i∆t, where i is the average current induced by the change in flux. (b) in a credit card reader, the magnetic strip on the back of a credit card is rapidly “swiped” past a coil within the reader. explain, using the same ideas that underlie the operation of a search coil, how the reader can decode the information stored in the pattern of magnetization on the strip. (c) is it necessary that the credit card be “swiped” through the reader at exactly the right speed? why or why not?

** urgent** the voltage across the primary winding is 350,000 v, and the voltage across the secondary winding is 17,500 v. if the secondary winding has 600 coils, how many coils are in the primary winding? a- 30 coilsb- 583 coilsc- 12,000 coilsd- 332,500 coils

An ideal otto cycle has a compression ratio of 10.5, takes in air at 90 kpa and 40°c, and is repeated 2500 times per minute. using constant specific heats at room temperature, determine the thermal efficiency of this cycle and the rate of heat input if the cycle is to produce 90 kw of power.