Physics, 14.04.2021 03:20, lily0806

Why might a scientist use a magnet and small strainer when investigating the physical properties of a substance?

Answers: 3

Show answers

Other questions on the subject: Physics

Physics, 21.06.2019 22:30, tladitidimatso1783

A2 kg ball travellng to the right with a speed of 4 m/s collidees with a 5 kg ball traveling to the left with a speed of 3 m/s. take right to be the positive direction. what is the total momentum of the two balls before they collide? what is the total momentum of the two balls after they collide?

Answers: 1

continue

Physics, 22.06.2019 00:30, ddea4081

Ablock of steel has a density of 0.29lbs per cubic inch. if the block has dimensions of 1 inch by 1 inch by 3 inches, what is its weight? a. 0.29lbs b. 0.58lbs c. 0.87lbs d. 1lbs

Answers: 1

continue

Physics, 22.06.2019 06:00, quetzaliescalona

A1,700kg car is being used to give a 1,400kg car a push start by exerting a force of 140n the impulse on the smaller car during the 30.0s of contact is +670kg*m/s. what is the impulse of the smaller car on the larger car? -814 kg*m/s 0kg *m/s -670kg*m/s -550kg*m/s

Answers: 1

continue

Physics, 22.06.2019 18:00, maren17

Air enters a gas turbine with two stages of compression and two stages of expansion at 100 kpa and 17°c. this system uses a regenerator as well as reheating and intercooling – the intercooler returns the air to the inlet temperature. the pressure ratio across each compressor is 4 ; 300 kj/kg of heat are added to the air in each combustion chamber; and the regenerator operates perfectly while increasing the temperature of the cold air by 20°c. determine the system’s thermal efficiency. assume isentropic operations for all compressor and the turbine stages and use constant specific heats at room temperature. (0.378)

Answers: 3

continue

Do you know the correct answer?

Why might a scientist use a magnet and small strainer when investigating the physical properties of...