Physics
Physics, 03.04.2021 19:50, ash011519

2 Blocks 1 and 2 rest on rough surfaces with coefficient of frictions ¢1 and ¢2 respectively. The blocks are connected by a cable that runs over a smooth pulley and are in equilibrium as shown below with the following values.

W2 = 50N
thetha 1 = 30 degrees
thetha 2= 40 degrees
¢1= 0.3
¢2= 0.25

a. If Block 2 is on the verge of sliding down the plane, what is the minimum weight W1, required for equilibrium?
b. If Block 2 is on the verge of sliding up the plane, what is the minimum weight W1, required for equilibrium
? Do not consider overturning.​


2 Blocks 1 and 2 rest on rough surfaces with coefficient of frictions ¢1 and ¢2 respectively. The b

answer
Answers: 1

Other questions on the subject: Physics

image
Physics, 21.06.2019 23:30, kaytonleeb
The velocity of car is 80.0 miles per hour. what is the velocity of car in meters per second? (1 km -0.621 miles) m/s
Answers: 2
image
Physics, 22.06.2019 04:10, brianamelara
Atotal charge of –6.50 µc is uniformly distributed within a sphere that has a radius of 0.150 m. what is the magnitude and direction of the electric field at 0.300 m from the surface of the sphere? a) 2.89 × 105 n/c, radially inward b) 6.49 × 105 n/c, radially outward c) 4.69 × 105 n/c, radially inward d) 9.38 × 105 n/c, radially outward e) 1.30 × 106 n/c, radially inward
Answers: 3
image
Physics, 22.06.2019 09:00, perezsamantha3oqr0za
As a pendulum bob swings back and forth several times, the maximum height it reaches becomes less and less. this is because more and more of the pendulum bob's energy is being transformed into a. heat energy b. kinetic energy c. potential energy d. kinetic energy and potential energy
Answers: 2
image
Physics, 22.06.2019 19:30, QueenNerdy889
Refrigerant-134a flows through a carnot heat pump cycle at 0.5 kg/s. it is known that the maximum absolute temperature in the cycle is 1.1 times the minimum absolute temperature, and the net power input to the cycle is 2.5 kw. if the refrigerant changes from a saturated vapor to a saturated liquid during the heat rejection process, determine the maximum magnitude of the enthalpy of vaporization for this process in kj/kg (with 3 significant figures).
Answers: 3
Do you know the correct answer?
2 Blocks 1 and 2 rest on rough surfaces with coefficient of frictions ¢1 and ¢2 respectively. The bl...

Questions in other subjects:

Konu
Business, 20.04.2021 15:10
Konu
English, 20.04.2021 15:10