. A 2 kg cart is pushed up a curved ramp with an initial velocity of 4 m/s. What is the maximum height the cart will reach on the ramp in meters? Round your answer to
the nearest tenth.

In a wind tunnel the speed changes as the cross sectional area of the tunnel changes. if the speed in a 6' x 6' square test section is 100 mph, what was the speed upstream of the test section where the tunnel measured 20' x 20'? use conservation of mass and assume incompressible flow. conservation of mass requires that as the flow moves through a path or a duct the product of the density, velocity and cross sectional area must remain constant; i. e., that ova-constant. a model is being tested in a wind tunnel at a speed of 100 mph if the flow in the test section is at sea level standard conditions, what is the pressure at the model's stagnation point? (a) the tunnel speed is being measured by a pitot-static tube connected to a u- tube manometer. what is the reading on that manometer in inches of water? (b) at one point on the model a pressure of 2058 psf is measured. what is the local airspeed at that point?

What organization and environment is described above?

It's a snowy day and you're pulling a friend along a level road on a sled. you've both been taking physics, so she asks what you think the coefficient of friction between the sled and the snow is. you've been walking at a steady 1.5m/s, and the rope pulls up on the sled at a 32 ∘ angle. you estimate that the mass of the sled, with your friend on it, is 65 kg and that you're pulling with a force of 80 n .