Physics, 12.03.2021 15:30, kyzerlinda

Sally swings a 0.45 kg hammer with a speed of 5 m/s, striking the head (flat back end) of a metal nail with its tip (sharp front end) resting on an oak wood surface. The tip of the metal nail has an area of 3 mm2 and the duration of the impact is 5.0 ms. The wood has a ultimate compressive strength of 6 MPa. Calculate the pressure applied by the tip of the nail onto the wood surface. Will the nail penetrate the wood

Answers: 2

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 07:00, dsperez201938

We put a force of 50n on an object and the acceleration is 100 m/s². what is the mass of the object?

Answers: 1

continue

Physics, 22.06.2019 10:00, blackjack73

The rocket is fired vertically and tracked by the radar station shown. when θ reaches 66°, other corresponding measurements give the values r = 32700 ft, r¨ = 85 ft/sec2, and θ˙ = 0.019 rad/sec. calculate the magnitudes of the velocity and acceleration of the rocket at this position.

Answers: 3

continue

Physics, 22.06.2019 10:10, xavierfox1721

In a simplified model of the human eye, the aqueous and vitreous humors and the lens all have a refractive index of 1.40, and all the refraction occurs at the cornea, whose vertex is 2.60 cm from the retina. what should be the radius of curvature of the cornea such that the image of an object 40.0 cm from the cornea’s vertex is focused on the retina?

Answers: 1

continue

Physics, 22.06.2019 10:30, legendman27

You are given two vectors a⃗ =−3.00ι^ 5.00j^ and b⃗ =5.00ι^ 2.00j^. let the counterclockwise angles be positive.

Answers: 3

continue

Do you know the correct answer?

Sally swings a 0.45 kg hammer with a speed of 5 m/s, striking the head (flat back end) of a metal na...