Physics
Physics, 09.03.2021 05:10, perezesmeralda78

The natural angular frequency of ocillation of a body of unit mass in
absence of damping is 4/sec. If it is
subjected to a small damping force
proportional velocity with constant of
proportionality being 10/sec. The general
solution for displacement is​

answer
Answers: 3

Other questions on the subject: Physics

image
Physics, 21.06.2019 22:00, oliviaschmitt0
Which type of microscope would allow the viewer to see ribosomes inside a cell?
Answers: 2
image
Physics, 22.06.2019 03:10, joho38
Athin plate moves between two parallel, horizontal, stationary flat surfaces at a constant velocity of v = 7.5 m/s. the two stationary surfaces are spaced 4 cm apart, and the medium between them is filled with oil whose viscosity is 0.9 n·s/m2. the part of the plate immersed in oil at any given time is 2 m long and 0.5 m wide. if the plate moves through the mid-plane between the surfaces, determine the force required to maintain this motion. what would your response be if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top surface (h1)? if the plate moves through the mid-plane between the surfaces, the force required to maintain the motion will be n. if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top (h1) surface, the force required to maintain the motion would be n.
Answers: 2
image
Physics, 22.06.2019 03:30, zahradawkins2007
As part of an industrial process, air as an ideal gas at 10 bar, 400k expands at steady state through a valve to a pressure of 4 bar. the mass flow rate of air is 0.5 kg/s. the air then passes through a heat exchanger where it is cooled to a temperature of 295k with negligible change in pressure. the valve can be modeled as a throttling process, and kinetic and potential energy effects can be neglected. (a) for a control volume enclosing the valve and heat exchanger and enough of the local surroundings that the heat transfer occurs at the ambient temperature of 295 k, determine the rate of entropy production, in kw/k. (b) if the expansion valve were replaced by an adiabatic turbine operating isentropically, what would be the entropy production? compare the results of parts (a) and (b) and discuss.
Answers: 3
image
Physics, 22.06.2019 07:30, darkskinnednune
Write the function getkthdigit(n, k) that takes a possibly-negative int n and a non-negative int k, and returns the kth digit of n, starting from 0, counting from the right
Answers: 3
Do you know the correct answer?
The natural angular frequency of ocillation of a body of unit mass in
absence of damping is 4...

Questions in other subjects:

Konu
Biology, 28.02.2020 22:26