Physics
Physics, 07.03.2021 01:10, dontcareanyonemo

Maria is holding a ball with a mass of .500 kg that has the potential energy of 10.0 J, calculate the height of the ball was dropped from.​

answer
Answers: 2

Other questions on the subject: Physics

image
Physics, 22.06.2019 03:00, ambercuevas2707
An internally reversible refrigerator has a modified coefficient of performance accounting for realistic heat transfer processes of where qin is the refrigerator cooling rate, qout is the heat rejection rate, and is the power input. show that copm can be expressed in terms of the reservoir temperatures tc and th, the cold and hot thermal resistances rt, c and rt, h, and qin, as where rtot rt, c rt, h. also, show that the power input may be expressed as 1.39 a household refrigerator operates with cold- and hot-temperature reservoirs of tc 5 c and th 25 c, respectively. when new, the cold and hot side resistances are rc, n 0.05 k/w and rh, n 0.04 k/w, respectively. over time, dust accumulates on the refrigerator’s condenser coil, which is located behind the refrigerator, increasing the hot side resistance to rh, d 0.1 k/w. it is desired to have a refrigerator cooling rate of qin 750 w. using the results of problem 1.38, determine the modified coefficient of performance and the required power input w under (a) clean and (b) dusty coil conditions. internally reversible refrigerator qout qin w high-temperature reservoir low-temperature reservoir th th, i tc, i tc high-temperature side resistance low-temperature side resistance w qin th tc qinrtot tc qinrtot copm tc qinrtot th tc
Answers: 2
image
Physics, 22.06.2019 19:50, drecooks713
What are the dimensions of the cross section that passes through the points a, f, g, and d?
Answers: 2
image
Physics, 22.06.2019 20:30, cupcake3103670
Aball is thrown from the top of a building with an initial velocity of 21.9 m/s straight upward, at an initial height of 51.6 m above the ground. the ball just misses the edge of the roof on its way down, as shown in the figure. (a) determine the time needed for the ball to reach its maximum height. (b) determine the maximum height. (c) determine the time needed for the ball to return to the height from which it was thrown, and the velocity of the ball at that instant. (d) determine the time needed for the ball to reach the ground. (e) determine the velocity and position of the ball at t = 5.35 s.
Answers: 1
image
Physics, 23.06.2019 02:00, fordkenae
Calculate the numbers of photons having a wavelength of 10.0 mm required to produce 1.0 kj of energycalculate the numbers of photons having a wavelength of 10.0 mm required to produce 1.0 kj of energy
Answers: 1
Do you know the correct answer?
Maria is holding a ball with a mass of .500 kg that has the potential energy of 10.0 J, calculate th...

Questions in other subjects: