Physics, 17.02.2021 20:10, daeshawnc14

5. How do you calculate the speed of light?

Answers: 2

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 15:20, mjwaple57

Acarpenter builds an exterior house wall with a layer of wood 2.9 cm thick on the outside and a layer of styrofoam insulation 2.3 cm thick on the inside wall surface. the wood has k=0.080w/(m⋅k), and the styrofoam has k= 0.010 w/(m⋅k). the interior surface temperature is 19.0 ∘c , and the exterior surface temperature is -15.0 ∘c . a.)what is the temperature at the plane where the wood meets the styrofoam? celsius b.)what is the rate of heat flow per square meter through this wall? /m^2

Answers: 2

continue

Physics, 22.06.2019 16:00, Nigward666

The solid that is formed and usually sinks to the bottom of a solution is the

Answers: 2

continue

Physics, 22.06.2019 23:30, danielahchf

Which of the following forces require physical contact? tension air resistance friction magnetic force applied force

Answers: 3

continue

Physics, 23.06.2019 06:30, IkarosSakurai

Asquare isothermal chip is of width w=5 mm on a side and is mounted in a substrate such that its side and back surfaces are well insulated; the front surface is exposed to the flow of a coolant at tinf=15 °c. from reliability considerations, the chip temperature must not exceed t=85 °c. if the coolant is air and the corresponding convection coefficient is h=200 w/m2 x k, what is the maximum allowable "power" of the chip? if the coolant is a liquid for which h=3000 w/m2 x k, what is the maximum allowable power of the chip?