Physics, 11.02.2021 16:10, angelinamadriga

An LED is rated at 2.3V and draws a current of 32mA , but it needs to be operated from a 12 V supply. Calculate the resistance, R.

Answers: 2

Show answers

Other questions on the subject: Physics

Physics, 21.06.2019 23:40, nicog94

Avalue that describes how heavy an object is and is related to the force of gravity is

Answers: 1

continue

Physics, 22.06.2019 12:30, mikurrjurdan

Matter is needed to transfer thermal energy bya. conductionb. convectionc. radiation d. both a & b.

Answers: 1

continue

Physics, 22.06.2019 15:20, mjwaple57

Acarpenter builds an exterior house wall with a layer of wood 2.9 cm thick on the outside and a layer of styrofoam insulation 2.3 cm thick on the inside wall surface. the wood has k=0.080w/(m⋅k), and the styrofoam has k= 0.010 w/(m⋅k). the interior surface temperature is 19.0 ∘c , and the exterior surface temperature is -15.0 ∘c . a.)what is the temperature at the plane where the wood meets the styrofoam? celsius b.)what is the rate of heat flow per square meter through this wall? /m^2

Answers: 2

continue

Physics, 22.06.2019 23:00, aliyyahlove

Awelder using a tank of volume 7.50×10^-2 m^3 fills it with oxygen (with a molar mass of 32.0 g/mol ) at a gauge pressure of 3.30×10^5 pa and temperature of 37.1 ∘c. the tank has a small leak, and in time some of the oxygen leaks out. on a day when the temperature is 23.1 ∘c, the gauge pressure of the oxygen in the tank is 2.00×10^5 pa . a) find the initial mass of oxygen. b) find the mass of oxygen that has leaked out.

Answers: 3

continue

Do you know the correct answer?

An LED is rated at 2.3V and draws a current of 32mA , but it needs to be operated from a 12 V supply...