Many people love roller coasters. Some people call them scream machines. They agree that riding a roller coaster is a thrilling experience. What you may not realize while you are going 60 miles an hour is that a roller coaster has no
engine. You are not being propelled around the track by a motor or pulled by anything. A roller coaster moves on its own. How do you think that
can happen?

There is some sort of "rollers" on the trail part that is used to make the roller coaster move when it is going up. Then because of that, the speed gets quicker when it drops down, so then it could move for a longer time until it reaches the next arch.

Explanation:

hope this helps :)

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).