A system is a group of parts that can be considered one unit. Storm systems, ecosystems, and our bodies are natural systems. Cars and houses are human-made systems. Choose an example of a system, and analyze the energy flow through the system. Describe in detail how energy enters the system, how energy changes form while in the system, and how energy leaves the system.

Some material consisting of a collection of microscopic objects is kept at a high temperature. a photon detector capable of detecting photon energies from infrared through ultraviolet observes photons emitted with energies of 0.3 ev, 0.5 ev, 0.8 ev, 2.0ev, 2.5ev, and 2.8ev. these are the only photon energies observed. (a) draw and label a possible energy-level diagram for one of the microscopic objects, which has four bound states. on the diagram, indicate the transitions corresponding to the emitted photons. explain briefly. (b) would a spring–mass model be a good model for these microscopic objects? why or why not? (c) the material is now cooled down to a very low temperature, and the photon detector stops detecting photon emissions. next, a beam of light with a continuous range of energies from infrared through ultraviolet shines on the material, and the photon detector observes the beam of light after it passes through the material. what photon energies in this beam of light are observed to be significantly reduced in intensity (“dark absorption lines”)? explain briefly.

The heater element of a 120 v toaster is a 5.4 m length of nichrome wire, whose diameter is 0.48 mm. the resistivity of nichrome at the operating temperature of the toaster is 1.3 × 10-6 ω·m. the toaster is operated at a voltage of 120 v. (a) what is the power drawn by the toaster? (b) if the cost of electricity is 12 ¢ per kilowatt-hour, and it takes 2 minutes to toast bread, how much does it cost for toasted bread? (c) when the heater element is at room temperature, is the resistivity in the nichrome wire greater than, less than, or equal to it’s resistivity when at operating temperature? explain.

On a mild saturday morning while people are working inside, the furnace keeps the temperature inside the building at 23degreesc. at noon the furnace is turned off, and the people go home. the temperature outside is a constant 16degreesc for the rest of the afternoon. if the time constant for the building is 3 hr, when will the temperature inside the building reach 18degreesc? if some windows are left open and the time constant drops to 2 hr, when will the temperature inside reach 18degreesc?