Physics, 21.01.2021 21:50, Ashley2466

Solutions that range in pH from 0 to 7 are acidic. Solutions that range in pH from 7 to 14 are basic. Solutions that have pH of 7 are neutral. The hydrogen ion concentrations for some solutions are given below. Use the pH formula to determine which is an acid, which is a base, and which is neutral. a. Solution A: The hydrogen ion concentration is equal to 101 M.
b. Solution B: The hydrogen ion concentration is equal to 0.0000001 M.
c. Solution C: The hydrogen ion concentration is equal to 10–13M.

Answers: 2

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 17:40, yoongnzl

Aspring is used to stop a 50-kg package which is moving down a 20º incline. the spring has a constant k = 30 kn/m and is held by cables so that it is initially compressed 50 mm. knowing that the velocity of the package is 2 m/s when it is 8 m from the spring and neglecting friction, determine the maximum additional deformation of the spring in bringing the package to rest.

Answers: 1

continue

Physics, 22.06.2019 21:10, bri9263

Two masses are connected by a rope that hangs over a pulley as shown below. the pulley is a uniform cylinder of radius 푅=0.381meters and mass 푀=3.1푘푔. initially 푚"is on the ground and 푚#rests 2.5 meters above the ground. if the system is released, use conservation of energy to determine the speed of 푚#just before it strikes the ground. assume the pulley bearing is frictionless.

Answers: 2

continue

Physics, 23.06.2019 02:00, howell62

Steel water aluminum think about the three words listed here. which word could be added as the title of this list of words to tell how these words are related? a) conductors b) heat c) insulators d) metals

Answers: 2

continue

Physics, 23.06.2019 06:30, IkarosSakurai

Asquare isothermal chip is of width w=5 mm on a side and is mounted in a substrate such that its side and back surfaces are well insulated; the front surface is exposed to the flow of a coolant at tinf=15 °c. from reliability considerations, the chip temperature must not exceed t=85 °c. if the coolant is air and the corresponding convection coefficient is h=200 w/m2 x k, what is the maximum allowable "power" of the chip? if the coolant is a liquid for which h=3000 w/m2 x k, what is the maximum allowable power of the chip?

Answers: 2

continue

Do you know the correct answer?

Solutions that range in pH from 0 to 7 are acidic. Solutions that range in pH from 7 to 14 are basic...