GOD IS coming faster then we know guys get right with God scripture says when it's the ending days we will all fall to ours knees and the ones who go to heaven will not suffer but those who stay on earth will suffer just know GOD IS NO RELIGION ITS NOT TO LATE to start believing God Bless you GOD LOVES You and so do i
Answers: 2
Other questions on the subject: Physics
Physics, 23.06.2019 02:30, Braxtonw875
Atrain is traveling at 30.0 m/s relative to the ground in still air. the frequency of the note emitted by the train whistle is 262 hz. the speed of sound in air should be taken as 344 m/s. what frequency (f approach) is heard by a passenger on a train moving at a speed of 18.0 m/s relative to the ground in a direction opposite to the first train and approaching it? what frequency (f recede) is heard by a passenger on a train moving at a speed of 18.0 m/s relative to the ground in a direction opposite to the first train and receding from it?
Answers: 1
Physics, 23.06.2019 08:30, 01222002
Atension test was conducted on a specimen of aisi 1020 hot-rolled steel having an initialdiameter of 9.11 mm. representative test data are given in table1in the form of force and engineering strain. for strain the extensometer gage length was li= 50.8 mm. in addition, minimumdiameters were measuredmanually with a micrometer in the necked region at several points during the test. after fracture, thebroken halves were reassembled, and the following measurements were made: (1) marks originally 25.4 mm apart and on opposite sides of the necked regionwere 38.6 mm apart due to the lengthwise stretching in the specimen; (2) similar marks originally 50.8 mm apart were 70.9 mmapart; (3) the final minimum diameter in the necked region was 5.28 mma) determine the following material properties: elastic modulus, 0.2% offset yield strength, ultimate tensile strength, percent elongation, and percent reduction in area. b) assume that the test was interrupted upon reaching a strain u = 0.007, and the specimen unloaded to zero force. estimate the elastic strain recovered and the plastic strain remaining. also, what would the new length of the original 50.8 mm gage section. hint: might save time/effort to use excel, mathcad, matlab, etc. to solve part a)table1 data and analysis for a tension test on aisi 1020 hot-rolled steeltest dataforce (p, kn)1. 0.002. 6.673. 13.344. 19.135. 17.796. 17.217. 17.538. 17.449. 17.2110. 20.7711. 24.2512. 25.7113. 25.7514. 25.0415. 23.4916. 21.3517. 18.9018. 17.39engr. strain (Ξ΅)1. 02. 0.00053. 0.00104. 0.00155. 0.00236. 0.00317. 0.00508. 0.00709. 0.010010. 0.049011. 0.125012. 0.218013. 0.234014. 0.306015. 0.330016. 0.348017. 0.360018. 03660diameter (d, mm)1. 9.112. 9.113. 9.114. 9.115. 9.116. 9.117. 9.118. 9.119. 9.1110. 8.8911. 8.8912. 8.2613. 8.2614. 7.6215. 6.9916. 6.3517. 5.7218. 5.28
Answers: 2
Do you know the correct answer?
GOD IS coming faster then we know guys get right with God scripture says when it's the ending days w...
Questions in other subjects:
