50. A body rests on a rough horizontal plane. A force is applied to the body directed towards
the plane at an angle Q with the vertical. The
body can be moved along the plane
(a) only if Q is more than the angle of friction
(b) only if Q is less than the angle of friction
(c) only if Q is equal than the angle of friction
(d) for all values of Q
(e) none of the above

Air is held within a frictionless piston-cylinder container, which is oriented vertically. the mass of the piston is 0.45 kg and the cross-sectional area is 0.0030 m2. initially (state 1) the pressure of the gas is sufficient to support the weight of the piston as well as the force exerted by the atmospheric pressure ( 101.32 kpa). the volume occupied by the air within the cylinder in state 1 is 1.00 liter. one end of a spring (with spring constant k = 1000 n/m) is attached to the top of the piston, while the other end of the spring is attached to a stage that can move vertically. initially the spring is undeflected and therefore exerts no force. then the stage is then moved quasistatically downward a distance of 10.0 cm, at which point the system reaches state 2. the piston-cylinder is not insulated; rather it remains in diathermal contact with the surroundings, which are at a constant temperature of 300 k. what is the change of pressure within the container?

A1,700kg car is being used to give a 1,400kg car a push start by exerting a force of 140n the impulse on the smaller car during the 30.0s of contact is +670kg*m/s. what is the impulse of the smaller car on the larger car? -814 kg*m/s 0kg *m/s -670kg*m/s -550kg*m/s

Which of the following is a characteristic shared by both electron and light microscopes? a. they both employ the use of objective lenses. b. both microscopes require an internal camera to visualize the specimen. c. both microscopes have a resolving power of 0.01 nm. d. they both utilize white light to magnify the specimen.