In an avalanche, a large amount of snow slides down a hill. What energy conversion takes place during an avalanche?
A. Gravitational potential energy to kinetic energy
B. Kinetic energy to elastic potential energy
C. Elastic potential energy to kinetic energy
D. Kinetic energy to gravitational potential energy

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)

You are driving directly behind a pickup truck, going at the same speed as the truck. a crate falls from the bed of the truck to the road. (a) will your car hit the crate before the crate hits the road if you neither brake nor swerve? (b) during the fall, is the horizontal speed of the crate more than, less than, or the same as that of the truck?

The power exerted by a muscle is the product of the force exerted and the velocity of contraction. the area of which of these shaded regions represents the power exerted while a weight is lifted at maximum speed?