Physics, 12.12.2020 19:20, evandlubbep6bsvu

The handle of a hammer is 20 cm long and the metal end pulls out a nail from the ground. If the length of the metal end that
touches the nail is 3 cm, what is the mechanical advantage
given by using the hammer's handle?

Answers: 2

Show answers

Other questions on the subject: Physics

Physics, 21.06.2019 22:50, toddbecca9

Acar of mass m goes around a banked curve of radius r with speed v. if the road is frictionless due to ice, the car can still negotiate the curve if the horizontal component of the normal force on the car from the road is equal in magnitude to 101) a) mv2/r b) mg/2. d) mg e) tan[v2/(eg)]

Answers: 2

continue

Physics, 22.06.2019 16:00, chamyaparker

What is the freezing point of radiator fluid that is 50% antifreeze by mass? kf for water is 1.86 ∘c/m.

Answers: 3

continue

Physics, 22.06.2019 16:40, blonk

An owl dives toward the ground with a constant velocity of 4.40 m/s at 53.0° below the horizontal. the sun is directly overhead and casts a shadow of the owl directly below it. what is the speed (in m/s) of its shadow on level ground?

Answers: 3

continue

Physics, 23.06.2019 00:40, bravomichelle75

Asteel tube (k=50 w/mk) of inner and outer diameter di = 20mm and do=26mm, respectively, is used to transfer heat from hot gases flowing over the tube (h-hot = 200w/m2k) to cold water flowing through the tube (h-cold = 8000 w/m2k). what is the cold-side overall heat transfer coefficient uc? to enhance heat transfer 16 straight fins of rectangular profile are installed longitudinally along the outer surface of the tube. the fins are equally spaced around the circumference of the tube, each having a thickness of 2mm and a length of 15mm. what is the corresponding overall heat transfer coefficient uc? *solve for uc in both cases*

Answers: 1

continue

Do you know the correct answer?

The handle of a hammer is 20 cm long and the metal end pulls out a nail from the ground. If the len...