Physics, 01.12.2020 01:00, smilxess

Question 1 OT 25 Match each element to the correct description of its usual behavior in a
chemical reaction.
Silicon (Si)
?
Will lose electrons
Sodium (Na)
Will gain electrons
Oxygen (0)
Could lose or gain
electrons
Argon (AN)
Does not gain or lose
electrons

Answers: 3

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 13:00, mandilynn22

Nacidified solution was electrolyzed using copper electrodes. a constant current of 1.18 a caused the anode to lose 0.584 g after 1.52 ✕ 103 s. given that the charge of an electron is 1.6022 ✕ 10−19 c, calculate avogadro's number. assume that copper is oxidized to cu2+ ions.

Answers: 1

continue

Physics, 22.06.2019 22:50, kinziemadison12

Which lists correctly orders nuclear reactions from most radioactive waste generated to least waste generated within a given period of time? o a. radioactive decay, nuclear fission, nuclear fusion o b. radioactive decay, nuclear fusion, nuclear fission o c. nuclear fusion, nuclear fission, radioactive decay o d. nuclear fission, nuclear fusion, radioactive decay

Answers: 3

continue

Physics, 23.06.2019 08:10, Jeileenrojas

Which research method uses information that governments, businesses, and educational institutions have already made available for public use? survey correlational research cross-cultural research secondary analysis

Answers: 2

continue

Physics, 23.06.2019 08:30, 01222002

Atension test was conducted on a specimen of aisi 1020 hot-rolled steel having an initialdiameter of 9.11 mm. representative test data are given in table1in the form of force and engineering strain. for strain the extensometer gage length was li= 50.8 mm. in addition, minimumdiameters were measuredmanually with a micrometer in the necked region at several points during the test. after fracture, thebroken halves were reassembled, and the following measurements were made: (1) marks originally 25.4 mm apart and on opposite sides of the necked regionwere 38.6 mm apart due to the lengthwise stretching in the specimen; (2) similar marks originally 50.8 mm apart were 70.9 mmapart; (3) the final minimum diameter in the necked region was 5.28 mma) determine the following material properties: elastic modulus, 0.2% offset yield strength, ultimate tensile strength, percent elongation, and percent reduction in area. b) assume that the test was interrupted upon reaching a strain u = 0.007, and the specimen unloaded to zero force. estimate the elastic strain recovered and the plastic strain remaining. also, what would the new length of the original 50.8 mm gage section. hint: might save time/effort to use excel, mathcad, matlab, etc. to solve part a)table1 data and analysis for a tension test on aisi 1020 hot-rolled steeltest dataforce (p, kn)1. 0.002. 6.673. 13.344. 19.135. 17.796. 17.217. 17.538. 17.449. 17.2110. 20.7711. 24.2512. 25.7113. 25.7514. 25.0415. 23.4916. 21.3517. 18.9018. 17.39engr. strain (ε)1. 02. 0.00053. 0.00104. 0.00155. 0.00236. 0.00317. 0.00508. 0.00709. 0.010010. 0.049011. 0.125012. 0.218013. 0.234014. 0.306015. 0.330016. 0.348017. 0.360018. 03660diameter (d, mm)1. 9.112. 9.113. 9.114. 9.115. 9.116. 9.117. 9.118. 9.119. 9.1110. 8.8911. 8.8912. 8.2613. 8.2614. 7.6215. 6.9916. 6.3517. 5.7218. 5.28

Answers: 2

continue

Do you know the correct answer?

Question 1 OT 25 Match each element to the correct description of its usual behavior in a
che...