Physics, 25.11.2020 22:50, jazare05

Which of the following is NOT a way that a machine makes work easier to do? A. Change the size of a force
B. Change the type of force
C. Change the direction of the force
D. Change distance a force acts

Answers: 1

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 01:10, caguil00

Asteam power plant operates on an ideal reheat rankine cycle between the pressure limits of 15 mpa and 10 kpa. the mass flow rate of steam through the cycle is 12 kg/s. steam enters both stages of the turbine at 500°c. if the moisture content of the steam at the exit of the low-pressure turbine is not to exceed 10 percent, determine (a) the pressure at which reheating takes place, (b) the total rate of heat input in the boiler, and (c) the thermal efficiency of the cycle. also, show the cycle on a t-s diagram with respect to the saturation lines. (2.15 mpa; 45.0 mw; 42.6%)

Answers: 3

continue

Physics, 22.06.2019 05:30, jjdj5218

Agas expands from an initial volume of 0.040 m^3 and an initial pressure of 210 kpa to a final volume of 0.065 m^3 while its temperature is kept constant. how much work is done by the system?

Answers: 1

continue

Physics, 23.06.2019 01:00, djs1671

To practice problem-solving strategy 10.1 for energy conservation problems. a sled is being held at rest on a slope that makes an angle θ with the horizontal. after the sled is released, it slides a distance d1 down the slope and then covers the distance d2 along the horizontal terrain before stopping. find the coefficient of kinetic friction μk between the sled and the ground, assuming that it is constant throughout the trip.

Answers: 1

continue

Physics, 23.06.2019 01:00, ptrlvn01

The smallest particle of an element that retains its identity in a chemical reaction. true or false

Answers: 1

continue

Do you know the correct answer?

Which of the following is NOT a way that a machine makes work easier to do? A. Change the size of a...