What is the current in the 10.0 resistor?

How does the space charge width change with forward and reverse bias? also, calculate the space charge width for a reverse bias of 4v on a silicon pn junction at t = 300k and doping concentrations of na = 5x1015cm-3 , nd = 5x 1016 cm-3 .

In a wind tunnel the speed changes as the cross sectional area of the tunnel changes. if the speed in a 6' x 6' square test section is 100 mph, what was the speed upstream of the test section where the tunnel measured 20' x 20'? use conservation of mass and assume incompressible flow. conservation of mass requires that as the flow moves through a path or a duct the product of the density, velocity and cross sectional area must remain constant; i. e., that ova-constant. a model is being tested in a wind tunnel at a speed of 100 mph if the flow in the test section is at sea level standard conditions, what is the pressure at the model's stagnation point? (a) the tunnel speed is being measured by a pitot-static tube connected to a u- tube manometer. what is the reading on that manometer in inches of water? (b) at one point on the model a pressure of 2058 psf is measured. what is the local airspeed at that point?

We put a force of 50n on an object and the acceleration is 100 m/s². what is the mass of the object?