Physics
Physics, 10.11.2020 17:00, AllanCasey12

A beam of 1 MeV neutrons of intensity 5x108 neutrons/(cm2 sec) strikes a thin 12C target. The area of the target is 0.5 cm2 and is 0.05 cm thick. The beam has a cross-sectional area of 0.1 cm2 . At 1 MeV, the total cross section of 12C is 2.6 b. (a) At what rate do interactions take place in the target

answer
Answers: 3

Other questions on the subject: Physics

image
Physics, 22.06.2019 08:00, cia196785920
If a balloon is taken outside on a very cold day, what will occur?
Answers: 1
image
Physics, 22.06.2019 08:20, mimithurmond03
The bubba chump shrimp company processes and packages shrimp for sale to wholesale seafood distributors. the shrimp are transported to the main plant by trucks that carry 1,000 pounds (lb) of shrimp. once the continuous flow processing of the shrimp begins, no inventory is allowed in buffers due to spoilage and all of the shrimp must be processed within 12 hours to prevent spoilage. the processing begins at the sorter, where the trucks dump the shrimp onto a conveyor belt that feeds into the sorter, which can sort up to 500 lb per hour. the shrimp then proceed to the desheller, which can process shrimp at the rate of 400 lb per hour. however, after 3 hours and 45 minutes of processing, the desheller must be stopped for 15 minutes to clean out empty shrimp shells that have accumulated. the veins of the shrimp are then removed in the deveining area at a maximum rate of 360 lb per hour. the shrimp proceed to the washing area, where they are processed at 750 lb per hour. finally, the shrimp are packaged and frozen. what is the daily process capacity of the processing plant (excluding the packaging and freezing)?
Answers: 2
image
Physics, 22.06.2019 08:20, jrjordans13ox06qs
At an oceanside nuclear power plant, seawater is used as part of the cooling system. this raises the temperature of the water that is discharged back into the ocean. the amount that the water temperature is raised has a uniform distribution over the interval from 10° to 25° c. what is the standard deviation of the temperature increase?
Answers: 1
image
Physics, 22.06.2019 08:20, cutechickens13
A3030 cmcm wrench is used to loosen a bolt with a force applied 0.30.3 mm from the bolt. it takes 6060 nn to loosen the bolt when the force is applied perpendicular to the wrench. how much force would it take if the force was applied at a 3030 degree angle from perpendicular? a 3030 cmcm wrench is used to loosen a bolt with a force applied 0.30.3 mm from the bolt. it takes 6060 nn to loosen the bolt when the force is applied perpendicular to the wrench. how much force would it take if the force was applied at a 3030 degree angle from perpendicular?
Answers: 3
Do you know the correct answer?
A beam of 1 MeV neutrons of intensity 5x108 neutrons/(cm2 sec) strikes a thin 12C target. The area o...

Questions in other subjects: