A copper wire has a radius of 2.9 mm. When forces of a certain equal magnitude but opposite directions are applied to the ends of the wire, the wire stretches by 5.0×10−3 of its original length. What is the tensile stress on the wire? Young's modulus for copper is 11×1010Pa.

550000000N/m

Explanation:

Given that a copper wire has a radius of 2.9 mm. When forces of a certain equal magnitude but opposite directions are applied to the ends of the wire, the wire stretches by 5.0×10−3 of its original length.

Original length L = 0.005L

the strain = extension/ original length

the strain = 0.005L / L

the strain = 0.005

Young modulus = stress / strain

11 × 10^10 = stress / 0.005

Cross multiply

Stress = 11 × 10^10 × 0.005

Stress = 550 000000 N/m

Therefore, the tensile stress on the wire is 550000000 N/m.

the body's situation won't change the forces are equal opposit and on the same body

as we probably am aware that our atmosphere or air have various levels, each level has different gasses, and each gas has another porousness. at the point when the light originates from lower porousness to higher penetrability, it alters its course. with the goal that implies that when the light originates from the moon to the earth, it alters it's course a lot more occasions. it essentially implies that the state of the light piece of the moon is changed on the earth.

not copied too! hope this !

joke:

h o h o hope you have a merry christmas!