QUESTION 2 At the end of an investigation, what should be done if the results do NOT support the hypothesis?

O A Repeat your investigation to ensure your results are accurate and then modify your hypothesis if necessary.

OB. Repeat your investigation over and over again until you get the results that will support your original hypothes

O C. Check your measurement tools to ensure they are working.

OD. Change the topic of your investigation to one that will yield results that support a hypothesis.

A. Repeat your investigation to ensure your results are accurate and then modify your hypothesis if necessary.

Explanation:

Having results that do not support the hypothesis is a common occurrence.

Hypotheses always depend on the data and experiment. If at the end of an investigation the results do not support the hypothesis, the investigation should be be repeated to further confirm this discovery.

And if there is still no correlation, then the hypothesis is not a reasonable explanation for the investigation and should be modified or rejected if necessary.

a solenoid is created by wrapping a l = 90 m long wire around a hollow tube of diameter d = 4.5 cm.   the wire diameter is d = 0.9 mm.   the solenoid wire is then connected to a power supply so that a current of i = 9 a flows through the wire.

randomized variablesl = 90 m

d = 4.5 cm

d = 0.9 mm

i = 9 a                                          

write an expression for the number of turns, n, in the solenoid. you do not need to take into account the diameter of the wire in this calculation.

calculate the number of turns, n, in the solenoid.

write an expression for the length of the solenoid (l2) in terms of the diameter of the hollow tube d.

calculate the length of the solenoid (l2)   in meters.

calculate the magnitude of the magnetic field at the center of the solenoid in teslas.

explanation: