Physics, 10.10.2020 21:01, alexkoval1231

A baseball is struck by a bat and 3 s later it is caught 30 m away. 3) A baseball is struck by a bat and 3 s later it is caught 30 m away.
a) If the baseball was 1 m above the ground when it was struck and caught, what was the greatest height it reached above the ground?
b) What were the horizontal and vertical components of its velocity when it was struck?
c) What was its speed when it was caught?
d) At what angle with the horizontal did it leave the bat?

Answers: 2

Show answers

Answers

answered: Guest

a solenoid is created by wrapping a l = 90 m long wire around a hollow tube of diameter d = 4.5 cm. the wire diameter is d = 0.9 mm. the solenoid wire is then connected to a power supply so that a current of i = 9 a flows through the wire.

randomized variablesl = 90 m

d = 4.5 cm

d = 0.9 mm

i = 9 a

write an expression for the number of turns, n, in the solenoid. you do not need to take into account the diameter of the wire in this calculation.

calculate the number of turns, n, in the solenoid.

write an expression for the length of the solenoid (l2) in terms of the diameter of the hollow tube d.

calculate the length of the solenoid (l2) in meters.

calculate the magnitude of the magnetic field at the center of the solenoid in teslas.

explanation:

answered: Guest

dec 23, 2016 - a load of bricks weighing 680 n a distance of 10 m across a parking lot. if if the worker pushes the cart with a constant force of 209 n, what work= force x distance = 220 n x 10 m = 2200 n.m = 2200 j i don't know where the person got it from, but the initial part, work= force x distance me.

answered: Guest

answer is slate

hope this

answered: Guest

Answer: a charge of -1.0 × 10⁻⁴ c must be placed at x = 26 m.the sign of the charge will be the same sign as the -4.0 µc charge.======electricstatic force between two point charges is given by $f = \dfrac{kq_1q_2}{r^2}$ where k is coulomb's constant, 8.99×10⁹ n·m²/c², q₁ and q₂ are the point charges, and r is the distance between the two point charges.assign positive to q₁let q₁ = 6.0 µc, q₂ = -4.0 µc, q₀ represent the charge at the origin, and q₃ represent this new charge to place.the charge at the origin q₀ would experience the following force f₀₁ from q₁, with r = 6.0 m (note that 1 µc = 10⁻⁶ c) $f_{01} = \dfrac{kq_0q_1}{(\text{6.0 m})^2}$ the force from q₂ $f_{02} = \dfrac{kq_0q_2}{(\text{15 m})^2}$ the force from q₃ $f_{03} = \dfrac{kq_0q_1}{(\text{26 m})^2}$ the net force on the origin charge, q₀, has to be zero for no electrostatic forcehaving an equation where k and q₀ can be divided out of the equation will allow us to solve for q₃ $\begin{aligned} f_{net} & = 0\\ f_{01} + f_{02} + f_{03} & = 0 \\ \dfrac{kq_0q_1}{(\text{6.0 m})^2} + \dfrac{kq_0q_2}{(\text{15 m})^2} + \dfrac{kq_0q_3}{(\text{26 m})^2} & = 0 \\ kq_0 \left( \dfrac{q_1}{(\text{6.0 m})^2} + \dfrac{q_2}{(\text{15 m})^2} + \dfrac{q_3}{(\text{26 m})^2}\right) & = 0 \\ \dfrac{q_1}{(\text{6.0 m})^2} + \dfrac{q_2}{(\text{15 m})^2} + \dfrac{q_3}{(\text{26 m})^2} & = 0 \end{aligned}$ isolating: $\begin{aligned} \dfrac{q_3}{(\text{26 m})^2} & = -\dfrac{q_1}{(\text{6.0 m})^2} - \dfrac{q_2}{(\text{15 m})^2} \\ q_3 & = -(\text{26 m})^2\left(\dfrac{q_1}{(\text{6.0 m})^2} + \dfrac{q_2}{(\text{15 m})^2}\right) \\ q_3 & = -(\text{26 m})^2\left(\dfrac{6.0\times10^{-6} \text{ c}}{(\text{6.0 m})^2} + \dfrac{-4.0\times10^{-6} \text{ c}}{(\text{15 m})^2}\right) \\ q_3 & = -1.0064888 \times 10^{-4}\text{ c} \\ q_3 & = -1.0\times 10^{-4}\text{ c} \end{aligned}$ a charge of -1.0 × 10⁻⁴ c must be placed at x = 26 m.the sign of the charge will be the same as the -4.0 µc charge

Other questions on the subject: Physics

Physics, 22.06.2019 00:30, katiebug197

Orange juice has a lower or higher viscosity than chocolate syrup

Answers: 2

continue

Physics, 22.06.2019 19:30, QueenNerdy889

Refrigerant-134a flows through a carnot heat pump cycle at 0.5 kg/s. it is known that the maximum absolute temperature in the cycle is 1.1 times the minimum absolute temperature, and the net power input to the cycle is 2.5 kw. if the refrigerant changes from a saturated vapor to a saturated liquid during the heat rejection process, determine the maximum magnitude of the enthalpy of vaporization for this process in kj/kg (with 3 significant figures).

Answers: 3

continue

Physics, 22.06.2019 23:40, itzdulce

To place a communications satellite into a geosynchronous orbit at an altitude of 22,240 mi above the surface of the earth, the satellite first is released from a space shuttle , which is in a circular orbit at an altitude of 185 mi, and then is propelled by an upper-stage booster to its final altitude. as the satellite passes through a, the booster's motor is fired to insert the satellite into an elliptic transfer orbit. the booster is again fired at b to insert the satellite into a geosynchronous orbit. knowing that the second firing increases the speed of the satellite by 4810ft/s, determine (a.) the speed of the satellite as it approaches b on the elliptic transfer orbit, (b.) the increase in speed resulting from the first firing at a.

Answers: 2

continue

Physics, 23.06.2019 00:20, nadiareese

When can a theory be modified if a new type of technology allows for new observations that raise new questions? a-immediately, while the questions about the theory are being asked b-after new hypotheses related to the theory are tested in experiments c-only after the new observations disprove all parts of the theory d-while scientists begin to think about how the theory could improve

Answers: 1

continue

Do you know the correct answer?

A baseball is struck by a bat and 3 s later it is caught 30 m away. 3) A baseball is struck by a ba...