Physics
Physics, 08.10.2020 01:01, BeautyxQueen

(II) Un avión viaja 3100 km a una rapidez de 720 km/h y luego encuentra un viento en cola que incrementa su rapidez a 990
km/h durante los siguientes 2800 km. ¿Cuál fue el tiempo total
del viaje? ¿Cuál fue la rapidez promedio del avión durante el
viaje? [Sugerencia: ¿Se aplica la ecuación 2-12d, o no?].

answer
Answers: 2

Other questions on the subject: Physics

image
Physics, 21.06.2019 20:00, johnLavender8262
The chemical effect of the endocrine system is longer lasting than the chemical effect of the nervous system. select the best answer from the choices provided t f
Answers: 3
image
Physics, 21.06.2019 23:30, asco0317p34v1s
Classify the following soils according to the uscs classification system. provide appropriate uscs designations. a) this sample of well-graded gravel with sand was obtained from a large earthen dam in vancouver, canada. the sample has 73% fine to coarse sub-angular gravel, 25% fine to coarse sub-angular sand and 2% fines. the maximum size of the particles is 75 mm. the coefficient of curvature is 2.7, while the uniformity coefficient is 12.4. b) this dark brown and wet soil with a “strong organic odor” has 100% passing the no. 200 sieve. the liquid limit of the material is 32% when not dried and is 21% when oven-dried. the plastic index is 21% when not dried. c) this sand has 61% predominantly fine sand, 23% silty fines, and 16% fine sub-rounded gravel size. the maximum size is 20 mm. the liquid limit is 33% and the plastic limit is 27%. d) this soil has 74% fine to coarse sub-angular reddish sand and 26% organic and silty dark brown fines. the liquid limit is 37% when not dried and is 26% when oven dried. the plastic index is 6% when not dried.
Answers: 1
image
Physics, 22.06.2019 10:30, gyexisromero10
Air is to be preheated by hot exhaust gases in a cross-flow heat exchanger before it enters the furnace. air enters the heat exchanger at 95 kpa and 20°c at a rate of 0.6 m^3/s. the combustion gases (cp = 1.10 kj/kg°c) enter at 160°c at a rate of 0.95 kg/s and leave at 95°c. determine the rate of heat transfer to the air and its outlet temperature.
Answers: 2
image
Physics, 22.06.2019 12:00, angelamirga332
Asolid round steel rod 6.25 mm in diameter and 375 mm long is rigidly bonded to the end of solid square brass rod 25 mm on a side and 300 mm long. the geometric axes of the bare are along the same line. an axial tensile force of 5.4 kn is applied at the extreme ends of the assembly. for steel e = 200 gpa and for brass e = 90 gpa. determine the total elongation for the assembly.
Answers: 1
Do you know the correct answer?
(II) Un avión viaja 3100 km a una rapidez de 720 km/h y luego encuentra un viento en cola que incre...

Questions in other subjects:

Konu
Mathematics, 09.04.2021 21:40