Emmy kicks a soccer ball up at an angle of 45° over a level field. She watches the ball's trajectory and notices that it lands, two seconds after being kicked, about 20 m away to the north. Assume that air resistance is negligible, and plot the horizontal and vertical components of the ball's velocity as a function of time. Consider only the time that the ball is in the air, after being kicked but before landing. Take "north" and "up" as the positive xx ‑ and yy ‑directions, respectively, and use g≈10g≈10 m/s2 for the downward acceleration due to gravity.

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).

it is very well related to a lot of things but with my limited knowledge i can confidently say that the answer is space.

a and c

c is 100% but i am confused in a

high-sugar diet and high cholesterol