Sound A person leaning over a 125-m-deep well accidentally drops a siren emitting sound of frequency 2500 Hz. Just before this siren hits the bottom of the well, find the frequency and wavelength of the sound the person hears (a) coming directly from the siren and
(b) reflected off the bottom of the well.
(c) What beat frequency does this person perceive

Ogle–2013–blg–0723 is an exoplanet that is similar to earth in size and proximity to its star. this exoplanet has mass m=4.18×1024kg and radius r=5.66×106m. an astronaut whose weight on earth is w=735n lands on the planet. a. calculate m, the mass of the astronaut. b. calculate gp? , the acceleration due to gravity on the surface of ogle–2013–blg–0723. c. calculate wp? , the weight of the astronaut on the surface of ogle–2013–blg–0723. d. calculate v, the minimum velocity required to put an object into orbit above ogle–2013–blg–0723. e. calculate t, the time required to complete an orbit around ogle–2013–blg–0723.

Two horizontal plates with infinite length and width are separated by a distance h in the z direction. the bottom plate is moving at a velocity u. the incompressible fluid trapped between the plates is moving in the positive x-direction with the bottom plate. align gravity with positive z. assume that the flow is fully-developed and laminar. if the systems operates at steady state and the pressure gradient in x-direction can be ignored, do the following: 1. sketch your system 2. identify the coordinate system to be used. 3. show your coordinates and origin point on the sketch. list all your assumptions. 5. apply the continuity equation to your system. nts of navier stokes equations of choice to your system 7. solve the resulting differential equation to obtain the velocity profile within the system make sure to list your boundary conditions. check units of velocity 8. describe the velocity profile you obtain using engineering terminology. sketch that on the same sketch you provided in (1). 9. obtain the equation that describes the volumetric flow rate in the system. check the units.

Avehicle has an oil leak that is causing the entire oil pan to be wet, but inspection reveals no exact source after cleaning off the oil residue. technician a says to install a fluorescent dye in the crankcase and operate the engine, then re-inspect for leaks with a special light (black light). technician b says the oil leak may be coming from a source at the top of the engine, such as a valve cover gasket. who is correct?